How to install the adhesive floor

Below are illustrations of the paving methods:

1. This self-adhesive floor is suitable for cement grounds or surfaces of ceramic tiles, terrazzo, or wooden boards.
2. Before the tiled floors, I suggest you clean the ground up, to make sure the ground is even, dry, and free of sand.
3. To make them stable, please pile the floors up and keep them still under constant temperature for over 24 hours.
4. We strongly suggest that the indoor temperature is kept between 10 Centigrade to 28 Centigrade (50 to 82.4 Fahrenheit).

Let start with the normal H-way flooring:

1. Get a floor, cut it up in the middle, and secure one of the pieces in the corner of the room.
2. Get a piece of uncut floor, justify the shorter end with the floor you paved before, and secure it. Pave the whole upper line in this way.
3. Before you tail out the upper line, you have to measure the space, and then cut a floor accordingly.
4. The next line starts with a whole piece. Pave them in the same way; the third line starts with a half piece. Pave the rest of the ground in exactly the same way.
5. In order to make the pavement better, we suggest you install a skirting floor in the first place.
6. If the skirting floor was installed before the pavement, we suggest you seal the seams with glass glue.
   These floors are both waterproof and damp-proof, and for the sake of safety, they are flame retardant.